Carbon monoxide has no smell, no taste, and no colour. A guest cannot see it coming, and neither can you. The alarm is the only warning.
On January 1, 2026, Ontario widened its carbon monoxide alarm rules. A home with a fuel-burning appliance, a fireplace, or an attached garage now needs an alarm on every storey, not just beside the bedrooms. The change covers houses, townhouses, and condo units alike, and it covers the homes Airbnb hosts rent out.
This guide covers the rule as it stands in 2026: which homes it catches, where the alarms go, who is responsible when a manager runs the unit, what Airbnb itself asks for, what the alarms cost, and what happens if you do not have them.
Quick facts
- What changed: Since January 1, 2026, a carbon monoxide alarm is required on every storey of a home with a fuel-burning appliance, a fireplace, or an attached garage, including storeys with no bedrooms. Alarms beside sleeping areas were already required.
- The law: Ontario Fire Code, O. Reg. 213/07, Section 2.16 of Division B, as amended by O. Reg. 87/25.
- Which homes: Any home with a fuel-burning appliance, a fireplace, or an attached garage, or heated by air from a fuel-burning appliance outside the home. An all-electric home with none of those needs no alarm under the Fire Code.
- Condos: A condo unit needs alarms beside each sleeping area and on every storey of the unit, when the triggers exist. A unit that shares a wall, floor, or ceiling with an underground parking garage needs them too.
- Who is responsible: The building owner. For a rental, that means the landlord. A property manager acting as the owner’s agent does the work, but the duty stays with the owner.
- Fines: A ticket can start at $235. On conviction, an individual faces up to $50,000 for a first offence, or up to a year in jail, or both.
- Cost: A basic plug-in alarm costs about $30. A three-pack of Kidde plug-in alarms runs about $69 at Costco.
TL;DR
- The rule changed on January 1, 2026. A carbon monoxide alarm is now required on every storey, including storeys with no bedrooms. The old rule asked only for alarms beside sleeping areas.
- The rule catches any home with a fuel-burning appliance, a fireplace, or an attached garage. Most all-electric downtown Toronto condos have none of those, so the Fire Code does not require an alarm in the unit itself, unless the unit shares a wall, floor, or ceiling with the building’s underground parking garage.
- The owner is responsible. Landlords must install the alarms, keep them working, test them every year and at every change of tenancy, and hand over the manufacturer’s maintenance instructions. A manager can do the work, but the duty stays with the owner.
- Airbnb does not make CO alarms a platform-wide rule. It strongly urges hosts to install them, shows the alarm on the listing, lets guests filter for it, and warns a guest before check-in if the listing reports no detector.
- A basic plug-in alarm costs about $30 and must carry a CSA 6.19 or UL 2034 mark. Test it at every turnover. Replace it when the manufacturer says so, usually after 7 to 10 years.
- A missing alarm can draw a ticket from $235 and, on conviction, a fine of up to $50,000 for an individual. It can also put a Toronto short-term rental registration at risk.
On this page:
- What Changed on January 1, 2026
- Which Homes Need a CO Alarm
- Where the Alarms Go
- Toronto Condos: The All-Electric Exception and the Parking-Garage Rule
- Who Is Responsible: You, Your Manager, or the Building?
- What Airbnb Itself Requires
- Which Alarm to Buy and What It Costs
- Testing, Replacement, and Records
- Fines and Enforcement
- If the Alarm Goes Off During a Stay
- Worked Example: The Cost of Compliance
- Same Rule in Every City, the Rest of the Rulebook Still Differs
- Host Checklist: CO Alarms at Every Turnover
- How Home Again Helps Ontario Owners
- Frequently Asked Questions
What Changed on January 1, 2026
Ontario has required carbon monoxide alarms in homes since the Hawkins-Gignac Act, named for a Woodstock family who died of carbon monoxide poisoning in 2008. Until the end of 2025, the rule was simple: one alarm beside the sleeping areas, in a home with a fuel-burning appliance, a fireplace, or an attached garage.
On January 1, 2026, Ontario Regulation 87/25 rewrote Section 2.16 of Division B of the Ontario Fire Code. The change brings Ontario in line with the 2020 National Fire Code of Canada. The headline change is placement. An alarm is now required on every storey of the home, not only beside the sleeping areas.
That matters because the floors without bedrooms are usually the floors where the danger lives. The furnace sits in the basement. The fireplace sits on the main floor. The garage sits at ground level. Under the old rule, none of those floors needed an alarm of their own. Now they do.
The change applies to existing homes, not just new builds. There was no grace period written into the regulation. It has applied since January 1, 2026, and municipal fire services enforce it the same way they enforce the smoke alarm rules.
The Ontario government’s own carbon monoxide safety page states the new rule plainly: a CO alarm must be installed adjacent to each sleeping area, and on every storey of the home, including storeys that do not have sleeping areas. The same wording covers a house and a condo unit.
Which Homes Need a CO Alarm
The rule does not catch every home. It catches a home that has any one of three things:
- A fuel-burning appliance. That means a gas, oil, or wood-burning furnace, water heater, stove, or dryer.
- A fireplace. Gas, wood, or any other fuel-burning fireplace counts.
- An attached garage. Cars running in a garage attached to the home are a carbon monoxide source.
There is a fourth trigger that catches some homes people forget. A home heated by air from a fuel-burning appliance that is not contained within the home also needs alarms. That covers a home heated from a furnace in a detached utility shed, for example.
If none of those triggers exist, the Fire Code does not require a carbon monoxide alarm in the home. An all-electric condo with an electric stove, electric heat, no fireplace, and no garage attached to the unit is outside the rule. That is the position most downtown Toronto condo owners are in, and it is covered in detail below.
Do not guess about the triggers. Check the unit itself: is the stove gas or electric, is there a gas fireplace, is the water heater gas, does the unit share a wall with the building’s garage? If you are not sure, ask the building manager or the condo board. The answer decides whether the rule applies at all.
Where the Alarms Go
When the rule applies, the alarms go in two kinds of place:
- Adjacent to each sleeping area. That means in the hallway or area outside the bedrooms. One alarm in the hallway nearest a group of bedrooms covers that group.
- On every storey of the home. That includes storeys with no bedrooms at all. A basement with no bedroom needs an alarm. A main floor with no bedroom needs an alarm.
One alarm can count for both places at once. A hallway alarm outside the bedrooms on the second floor covers the sleeping area and that storey in one device. But a home with bedrooms on two floors needs an alarm on each of those floors, and a basement with the furnace in it needs its own alarm even if nobody sleeps down there.
Bedrooms that sit far apart on the same floor need separate alarms. If two bedrooms sit on opposite sides of a living room, for example, each group needs its own alarm in the hallway outside it. The test is simple: can a sleeping person hear the alarm from their bedroom? If the answer is no, add another one.
Do not put a CO alarm right beside the furnace, the stove, or the fireplace. The alarm belongs where people sleep and on each floor, not on top of the appliance. Follow the manufacturer’s instructions for distance from fuel-burning appliances, and never put an alarm in a bathroom or a room full of steam.
Toronto Condos: The All-Electric Exception and the Parking-Garage Rule
Most downtown Toronto condos are all-electric. Electric heat, electric stove, electric water heater, no fireplace, no garage attached to the unit. For those units, the Fire Code does not require a carbon monoxide alarm. The triggers are not there.
But two common Toronto condo situations do trigger the rule, and owners miss both:
A gas fireplace. Some newer and higher-end Toronto condos have gas fireplaces. A gas fireplace is a fuel-burning appliance. The unit needs an alarm beside each sleeping area and on every storey of the unit.
A unit that shares a wall, floor, or ceiling with the underground parking garage. The Fire Code treats this the same way as an attached garage. A unit next to, above, or below the garage needs a CO alarm beside each sleeping area and on every storey of the unit that does not have a sleeping area. In a typical downtown tower, that catches the units on the lowest residential floors, the ones sitting right over the parking levels.
Check both before you decide the rule does not apply. Look at the unit’s own appliances first, then ask the building whether the unit shares a wall, floor, or ceiling with the garage. The building manager will know. If either answer is yes, the unit needs alarms.
Even when the Fire Code does not require an alarm, installing one is still a reasonable choice. A basic plug-in alarm costs about $30, it takes a minute to fit, and it answers the question a guest asks before booking: does this listing have a carbon monoxide alarm? That question matters more than the legal minimum, because Airbnb shows the answer on the listing.
One more condo point. Your condo board can set its own rules on top of the Fire Code. A board can require alarms in every unit, or restrict how a gas fireplace is used by short-term guests. Check the declaration and the board rules before you list, the same way you would check whether the board allows short-term rentals at all. Our guide to Toronto condo board rules covers that check.
Who Is Responsible: You, Your Manager, or the Building?
The Fire Code puts the duty on the building owner. For a rental, that means the landlord. In an Airbnb, the landlord is the host. The host is the owner of the unit, or the tenant hosting with the owner’s permission.
The landlord’s duties are specific. Install the alarms the Fire Code requires. Keep them in working order. Test them every year, at every change of tenancy, and after a battery replacement or a change to the electrical circuit. Give the tenant the manufacturer’s maintenance instructions. A tenant must not disable an alarm, and must report a problem to the landlord promptly.
For a short-term rental, every guest stay is a change of tenancy in practice, even though the Fire Code’s testing rule was written for long-term rentals. The practical standard for a host is simple: test the alarm at every turnover, and keep a record that you did. The turnover clean is the natural moment. The cleaner is already in the unit, and pressing the test button takes seconds. Our cleaning standards checklist covers how to build that check into the turnover routine.
If a property manager runs the unit, the manager does the work as the owner’s agent, but the legal duty stays with the owner. A manager cannot take the fine for you. That is why the owner’s job is to check that the work is actually done: ask for a photo of the alarm at the turnover, ask for the test date, and keep the record. A manager who cannot show you either is not doing the job.
In a condo, the split is between the unit and the building. The unit owner is responsible for the alarms inside the unit. The condo corporation is responsible for the common areas, including the parking garage’s own detection systems. Neither side covers the other. Do not assume the building’s garage system protects your unit. It does not replace an alarm inside the unit.
Toronto’s short-term rental rules add a second layer. The City inspects registered operators in person, and the operator must attend the inspection personally. A manager or co-host cannot attend in their place. The inspection checks the registration conditions, including the safety postings the 2024 amendments require: the 911 information, the exit diagram, and the emergency contact. A missing CO alarm is a Fire Code breach on its own, and it is the kind of thing an inspection, or a 311 complaint from a neighbour, brings to the City’s attention. Our guide to the Toronto Airbnb inspection walks through what the inspector checks.
What Airbnb Itself Requires
Airbnb does not make carbon monoxide alarms a platform-wide rule. It strongly urges hosts to install smoke and carbon monoxide alarms in spaces with fuel-burning appliances. The enforcement, Airbnb says, falls to city and local regulations, not to Airbnb itself.
That does not mean Airbnb ignores the question. Three things on the platform push hosts toward installing one:
- The listing shows it. Hosts report whether the listing has a smoke alarm and a carbon monoxide alarm, and the listing displays the answer.
- Guests can filter for it. A guest who wants a listing with a CO alarm can search for one.
- Airbnb warns the guest. If a guest books a listing where no detector has been reported, Airbnb flags that to the guest before check-in.
Airbnb also runs a program that sends free combination smoke and carbon monoxide detectors to eligible hosts. If you qualify, the alarm costs nothing. Check the program in your Airbnb account before you buy one.
The practical point for a Toronto host is this: the Fire Code decides whether you must have an alarm, and Airbnb decides whether guests see that you have one. A listing that reports a CO alarm looks safer than a listing that reports none, and a guest who filters for one will never see your listing at all if you do not have it. The alarm costs about $30. The booking it protects is worth far more.
Which Alarm to Buy and What It Costs
Hardwired, battery-operated, and plug-in alarms are all permitted under the Fire Code. A plug-in alarm with a battery backup is the simplest choice for a rental: it plugs into a standard outlet, it keeps working in a power cut, and a guest cannot easily take it down.
Whatever type you buy, look for the certification mark. In Canada, that means a CSA 6.19 or UL 2034 mark, or a ULC or Intertek (ETL) mark. An alarm without a recognised mark does not meet the standard, and a cheap uncertified alarm from an online marketplace is worse than no alarm at all, because it gives you false confidence.
Combination smoke and carbon monoxide alarms are permitted, and they make sense in a small condo where one device can cover both jobs. But remember that smoke alarms and CO alarms are separate requirements. A smoke alarm does not detect carbon monoxide, and a CO alarm does not detect smoke. If you buy a combination unit, it must be certified for both.
On price, a basic plug-in CO alarm costs about $30 in Canada. A First Alert plug-in alarm with battery backup lists at about $31 on Amazon.ca, and a three-pack of Kidde plug-in alarms with battery backup runs about $69 at Costco, roughly $23 each. A smart alarm with a display, voice alerts, and a 10-year sealed battery costs more, usually $60 to $90. For most Toronto condos, the basic plug-in model is enough.
Buy one alarm per place the rule requires, not one per unit. A single-storey one-bedroom condo with a gas fireplace needs one alarm in the hallway outside the bedroom. A two-storey townhouse with a gas fireplace needs one on each storey. Count the places first, then buy.
Testing, Replacement, and Records
An alarm that does not work is the same as no alarm, and the Fire Code treats it that way. The landlord’s duty is not just to install the alarm. It is to keep it working.
The routine is short:
- Test at every turnover. Press the test button at each guest changeover. The cleaner can do it during the turnover clean and note it in the turnover report with a photo.
- Test every year at minimum. The Fire Code requires testing at least once a year, and at every change of tenancy. For a short-term rental, the turnover test covers both.
- Test after any battery change or electrical work. A battery replacement or a change to the circuit can leave an alarm silent. Test it again after the work.
- Replace batteries when the alarm chirps. A regular chirp means the battery is low. Replace it at once, not at the next turnover.
- Replace the alarm when the manufacturer says so. Most alarms last 7 to 10 years. The expiry date is printed on the back of the unit. Write it down when you install it, and set a reminder for the month it expires.
- Keep the instructions in the unit. Leave the manufacturer’s maintenance instructions where the cleaner and the manager can find them, and give a copy to the guest in the house manual if the alarm needs any guest action, such as what the test button does.
Keep a simple record: the date each alarm was installed, the make and model, the expiry date, and the date of the last test. A photo of the alarm at each turnover, with the test light showing, is enough. That record is what you show an inspector, an insurer, or a guest who asks. Without it, you are relying on memory, and memory does not hold up after an incident.
One related duty that owners forget: the Fire Code also requires every chimney, flue, and flue pipe to be inspected for dangerous conditions at least every 12 months. If the unit has a wood or gas fireplace, that annual inspection belongs on the same calendar as the alarm test.
Fines and Enforcement
A missing or dead CO alarm is an offence under the Fire Protection and Prevention Act, and the penalties are not small.
For an individual, a first offence carries a fine of up to $50,000, or up to a year in jail, or both. A second offence carries up to $100,000. For a corporation, the fine goes up to $500,000 for a first offence and $1,500,000 after that. A director or officer of a corporation who knows the corporation is breaking the Fire Code faces the same individual penalties.
In practice, most cases start smaller. A fire prevention officer can issue a ticket, and set fines for alarm violations can start at $235. One Ontario landlord was ticketed for failing to install smoke and CO alarms in a multi-unit building, and another faced a $7,500 fine for violations across two dwellings. The ticket is the warning. The $50,000 figure is what a conviction can bring.
Enforcement is local. In Toronto, a guest or neighbour can call 311, and Toronto Fire Services will send a fire inspector. The inspector can order the missing alarms installed, and failing to follow the order is itself an offence. For a registered short-term rental operator, a Fire Code breach can also put the registration at risk: the City can revoke a registration or refuse a renewal, and a revoked operator cannot re-register for 12 months.
There is a money risk beyond the fine. A home that is not up to the Fire Code can put an insurance claim at risk after a fire or a carbon monoxide incident. And since 2024, the Canada Revenue Agency can deny rental expense deductions for days a short-term rental was not compliant with local rules. A $30 alarm is cheap protection against all three. Our guides to short-term rental insurance and Airbnb tax rules for Ontario condo owners cover both risks in detail.
If the Alarm Goes Off During a Stay
Tell every guest where the alarm is and what to do if it sounds. Put it in the house rules and in the welcome book, in plain words. A guest who has never heard a CO alarm will not know what it means unless you tell them.
The steps are the same ones fire services give every household:
- Get everyone out of the unit at once. Do not stop to open windows or look for the source.
- Call 911 from outside. Do not call from inside the unit.
- Stay out until firefighters say it is safe to go back in. Do not silence the alarm and carry on with the stay.
- Tell the host or the manager right away, so the unit is checked before the next guest arrives.
Never bring a barbecue, a generator, or any fuel-burning heater indoors, and never run a car in an attached or underground garage with the door closed. Those are the common ways carbon monoxide builds up in a home, and no alarm can protect a guest if the source is running inside the living space.
After an alarm sounds, do not re-list the unit until the cause is found and fixed. A furnace, water heater, or fireplace that set off the alarm needs a licensed technician before the next guest checks in. The cost of that visit is small next to the cost of a second alarm, or a guest who does not wake up.
Worked Example: The Cost of Compliance
Take a two-storey townhouse condo in Toronto with a gas fireplace. The bedrooms are upstairs, the living room is on the main floor, and the furnace sits in the basement. Under the 2026 rule, it needs three alarms: one in the upstairs hallway outside the bedrooms, one on the main floor, and one in the basement.
Three basic plug-in alarms at about $30 each cost $90, plus 13% HST of $11.70, for a total of $101.70. That is a one-time cost. The alarms last 7 to 10 years, so the cost works out to roughly $10 to $15 a year.
Set that against the numbers that matter to a host. A median Toronto listing earns about $160 a night, on AirROI’s Toronto data for the 12 months to October 2026 (11,027 listings, median nightly rate $160, average $250, occupancy 47%). The three alarms cost less than one night’s revenue. A single ticket for a missing alarm can start at $235. A conviction can reach $50,000. And a Toronto short-term rental registration costs $390 a year to hold, a registration a Fire Code breach can put at risk.
A single-storey one-bedroom condo with a gas fireplace needs just one alarm: about $30, plus $3.90 HST, for $33.90 all in. The cleaner presses the test button during the regular turnover clean, which runs about $115 for a one-bedroom in the Toronto core, so testing adds no cost at all.
The arithmetic is the point. Compliance costs less than a night’s stay. Non-compliance costs a ticket, a fine, or a registration. There is no version of the numbers where skipping the alarm saves money.
Same Rule in Every City, the Rest of the Rulebook Still Differs
The carbon monoxide rule is provincial. It is the same Fire Code in Toronto, Mississauga, Hamilton, Burlington, Oakville, and Brampton. The rest of the short-term rental rulebook is not. Each city sets its own licence fee, its own night cap, and its own accommodation tax.
| City | CO alarm rule | Short-term rental licence | Accommodation tax |
|---|---|---|---|
| Toronto | Same Fire Code rule | $390 a year | 6% since August 1, 2026 |
| Mississauga | Same Fire Code rule | $283 a year | 6% since January 1, 2024 |
| Hamilton | Same Fire Code rule | $953.80 new, $533.80 renewal (entire dwelling) | 4% since July 1, 2026 |
| Burlington | Same Fire Code rule | $300 application, $300 annual renewal | None on short-term rentals; the 4% tax applies to hotels and motels only |
| Oakville | Same Fire Code rule | $292 for 2026 | 4% since January 1, 2019 |
| Brampton | Same Fire Code rule | $150, expires every September 30 | 4% since January 1, 2024 |
Do not carry one city’s numbers into another city’s unit. The CO alarm rule travels with you, because it is provincial. The licence fee, the night cap, and the tax do not. If you host in more than one city, check each city’s own guide before you count any income. Our city guides cover Mississauga, Hamilton, Burlington, Oakville, and Brampton, and our Toronto key dates calendar tracks the deadlines that apply across the year.
Host Checklist: CO Alarms at Every Turnover
Build the alarm into the turnover routine, so it is checked every time a guest leaves and before the next guest arrives:
- Count the alarms. Walk the unit and count one alarm beside each sleeping area and one on every storey. Note the count in the turnover report.
- Press the test button. The cleaner tests each alarm during the turnover clean and photographs it. A photo with the test light showing is the record.
- Check the expiry date. Read the date printed on the back of each alarm once a year, and replace any alarm that has expired.
- Replace low batteries at once. A chirping alarm gets a new battery the same day, not at the next turnover.
- Check the fireplace and flues yearly. Book the annual chimney, flue, and flue pipe inspection, and keep the report with the alarm record.
- Tell the guest. Put the alarm’s location and the if-it-sounds steps in the house rules and the welcome book.
- Keep one file. Installation dates, makes and models, expiry dates, test dates, and the annual flue inspection report, all in one place. That file is what you show an inspector, an insurer, or a guest who asks.
How Home Again Helps Ontario Owners
Home Again manages short-term and mid-term rentals for owners across Toronto and the GTA. The safety checks start before the first booking: confirming whether the unit needs a CO alarm at all, counting how many it needs and where they go, fitting certified alarms, and building the test into the turnover routine so a photo of the alarm lands in the turnover report at every guest changeover. Our fee is 15% of booking revenue for full management, set out in our management fees guide, and our Toronto service is described on our Toronto Airbnb management page.
If your unit is all-electric and the Fire Code does not require an alarm, we will tell you that plainly, and fit one anyway if you want the listing to show it. Either way, the first step is the same. Check the unit against the three triggers, then fit the alarms before the next guest arrives. Heating season is already here, and the rule has applied since January 1.
Frequently Asked Questions
Does my Toronto condo need a carbon monoxide alarm?
It depends on the unit. The Fire Code requires a CO alarm only in a home with a fuel-burning appliance, a fireplace, or an attached garage. Most all-electric downtown Toronto condos have none of those, so no alarm is legally required in the unit itself. The two exceptions are a unit with a gas fireplace, and a unit that shares a wall, floor, or ceiling with the building’s underground parking garage. Either one triggers the rule.
What changed about Ontario’s carbon monoxide alarm rules on January 1, 2026?
The placement rule widened. Before January 1, 2026, a home with a fuel-burning appliance, a fireplace, or an attached garage needed a CO alarm beside each sleeping area. Since that date, under Ontario Regulation 87/25, it also needs an alarm on every storey of the home, including storeys with no bedrooms. The basement with the furnace and the main floor with the fireplace now need their own alarms.
Where exactly do CO alarms go in a condo unit?
Beside each sleeping area, in the hallway or area outside the bedrooms, and on every storey of the unit, including storeys with no bedrooms. One hallway alarm can cover both the sleeping area and that storey. Bedrooms far apart on the same floor need separate alarms, one in the hallway outside each group.
Who is responsible for the alarm, me or my property manager?
You are. The Fire Code puts the duty on the building owner, and for a rental that means the landlord. A property manager does the work as your agent, fitting the alarms, testing them at turnovers, and keeping the record, but the legal duty and the fine stay with the owner. Ask your manager for a photo of the alarm and the test date at every turnover.
Does Airbnb require a carbon monoxide alarm?
No, not as a platform-wide rule. Airbnb strongly urges hosts to install smoke and carbon monoxide alarms in spaces with fuel-burning appliances, and says enforcement falls to local regulations. But the listing shows whether you have one, guests can filter for listings with one, and Airbnb warns a guest before check-in if the listing reports no detector. Airbnb also runs a program that sends free combination smoke and CO detectors to eligible hosts.
How much does a carbon monoxide alarm cost, and which one should I buy?
A basic plug-in alarm costs about $30 in Canada. A First Alert plug-in alarm with battery backup lists at about $31 on Amazon.ca, and a three-pack of Kidde plug-in alarms runs about $69 at Costco. Buy an alarm with a CSA 6.19 or UL 2034 mark, or a ULC or Intertek (ETL) mark. Hardwired, battery, and plug-in models are all permitted. A plug-in with battery backup is the simplest choice for a rental.
How often do I test or replace a CO alarm?
Test it at every guest turnover, and at least once a year. The Fire Code requires testing every year, at every change of tenancy, and after a battery replacement or a change to the electrical circuit. Replace a low battery as soon as the alarm chirps. Replace the alarm itself when the manufacturer says so, usually after 7 to 10 years, and keep the expiry date on file.
What happens if my rental does not have a CO alarm?
A fire prevention officer can issue a ticket, with set fines starting at $235. On conviction under the Fire Protection and Prevention Act, an individual faces a fine of up to $50,000 for a first offence, or up to a year in jail, or both. In Toronto, a neighbour or guest can call 311 and Toronto Fire Services will send an inspector. For a registered short-term rental, a Fire Code breach can also put the registration at risk, and the CRA can deny rental expense deductions for non-compliant days.
